Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture seeps in and ends up being trapped in between the outer vinyl shell and the plastic wrapped foam cores. The warm, wet environment is ideal for mold and mildew and other forms of stinky things.
If moisture has permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and stinky slime, however also make the cover actually difficult to remove, and not as efficient at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or damaged. Broken foam cores, ripped or worn areas, torn joints. A Swim Spa Cover that loses it’s arched roof line, to keep water draining pipes off properly, will eventually begin to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is likewise problem, and although you can fend off the inevitable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can hold up against longer durations, but it’s a great routine to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to permit moisture to leave do so, but do not get rid of vulnerable foam panels unless definitely needed.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it won’t stop moisture effectively. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the intense wetness from your spa from reaching the foam core. The only real service is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept regularly with sanitizer and filtering, or is not stunned frequently enough, germs and algae can take advantage of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can also degrade the underside of your Swim Spa Cover cover. Since the cover is so near the spa, it soaks up the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent smelly spa covers. (Sorry but this is simply BS) The truth is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times each year, so that it always looks terrific, and is safeguarded from the components. Again, this really isn’t going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealership pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This first step might appear obvious, but you need a great place to allow the cover to sit undisturbed from family pets, wild animals, and winds. It must be a bright place if possible, or a dry indoor location with low humidity can also be used.
• Deodorize & Disinfect: You might not need to do both, it’s finest to be as gentle as possible. Don’t use household cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, since the panels could become damaged throughout removal or cleansing. But if you figure out that there is something slimy within, you can usually unzip and eliminate the panel for a cleaning inside and out.

How often does your spa dealership anticipate you to do all this? If your swim spa is safeguarded from the majority of sun and rain, two times annually. If it’s visible it should be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Much better Choice
The simplest cure for a smelly Swim Spa Cover is to just buy a different type of Swim Spa Cover A foul-smelling swim spa cover simply indicates that your cover is handling wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has actually sealed air chambers instead will avoid providing the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *